How the AMF grades a home: Well Maintained, Maintained or Below.
References are to the AHO Asset Management Framework, Version 4, September 2024 (AMF V4).
This page is Boorn Digital's reading of the AMF. It is not AHO guidance. The AHO has not endorsed Tend. Check the AMF itself, and your agreement with the AHO, for what applies to you.
Read the AMF on the AHO's website (PDF, 700 KB)
Four measures, checked together.
A home meets a benchmark only when every measure is within it.
Appendix A, section 4 Table 2
Well Maintained
Every one of these:
- No major safety faults
- 1 minor safety fault at most
- No major functional faults
- Repairs of $3,300 or less for a cottage, townhouse or villa, or $2,100 or less for a unit
Maintained
Every one of these:
- No major safety faults
- 3 minor safety faults at most
- 2 major functional faults at most
- Repairs of $6,600 or less for a cottage, townhouse or villa, or $4,200 or less for a unit
Below Maintained Standards
Any one of these:
- 1 or more major safety faults
- More than 3 minor safety faults
- More than 2 major functional faults
- Repairs of more than $6,600 for a cottage, townhouse or villa, or more than $4,200 for a unit
The AMF says the dollar figures are adjusted yearly with CPI, and they don't include GST or labour costs. Table 2 and its note
In the AMF's words, Maintained is “a standard to comply with the Residential Tenancies Act 2010 of safe, clean, and habitable”. It describes Below Maintained Standards dwellings as ones that comply with the Act but fall outside Maintained. Appendix A, section 4
Where the words and Table 2 differ.
In three places, Appendix A's text and its table don't say the same thing.
| Point | Appendix A's text says | Table 2 says |
|---|---|---|
| Major safety faults for Below Maintained Standards | “more than 1 major safety fault” | 1 or more. Maintained allows none, so in the table one major safety fault is enough. |
| Which repair costs count for Well Maintained | “the total amount calculated to rectify identified safety faults”, where Maintained counts “safety and functional faults” | “Costs of Repairs”, with no fault type named |
| How Below Maintained Standards is defined | Dwellings that “do not fall within the definition of the ‘Maintained’ benchmark”, then a list of measures joined by “and” | A separate threshold for each measure, beside Maintained's |
If the difference matters for one of your homes, ask your AHO program officer which reading they apply.
What feeds the grade.
The ACA's data, at the time of the assessment.
Section 2.1(c) Section 3.1.2(c) Appendix A, section 4
- Three things it incorporates The home's condition, its safety faults, and the estimated cost of outstanding maintenance. Section 2.1(c) Table 2 also counts major functional faults. Table 2
- From the ACA The ACA captures the condition, defects and characteristics of each building component, and its data determines the benchmark. What the ACA records
- Major and minor Table 2 counts major and minor faults. Appendix A doesn't define what makes a fault major or minor, so ask the AHO how its ACA app classes them.
| Failure | What it means |
|---|---|
| Function | A component and its subcomponents aren't performing as designed. A component must be complete, secure and have no missing subcomponents. |
| Safety | Safety sets the priority for repairing a functional failure. Safety failures are categorised from low to high using criticality indicators, and because they can cause injury, a high-category one must be repaired sooner than a lower one. |
| Appearance | No effect on how the component works, such as discolouration or superficial damage. The repair response time is discretionary. |
Maintained is the floor.
What the AMF expects of every AHO-owned home.
- Keep each home within the Residential Tenancies Act 2010 and the APS. Section 2.1(a)
- Plan maintenance so homes stay at or above Maintained. Section 2.2.1(c)
- Homes marked for sale or redevelopment still get planned and responsive maintenance, so they're Maintained while occupied. Section 2.1(d)
- Do the maintenance that keeps each home structurally sound and Well Maintained. Section 2.4.1(a)
- The AHO uses the benchmarks to find homes that aren't Maintained and target them for planned and responsive work. Appendix A, section 4
- Each home also has an Average Condition Score, which can compare overall condition across regions and providers. For key performance indicator targets, the AMF points to the AHO's Provider Performance Framework. Appendix A, section 5
See it against your own homes.
Run one property free, and compare the report with what the AMF asks for.
- The AMF, on one page What it asks for, and when
- The AMF, in depth The ACA · APS benchmarks · Repair times · The AM&MP